Rokade Rototechniks Logo


Javascript DHTML Drop Down Menu Powered by

Inhouse Balancing, Vibration Analysis, Field Balancing, Rotor Repair & Services, Horizontal / Vertical Balancing Machine , Instrumentation For Balancing Machines, Portable Balancer & Analyser,  Vibration Monitoring Systems



Bearing Induction Heaters - BALTECH HI-1612

  • baltechh116121
  • baltechh116122
  • jquery slideshow
  • baltechh116124

The induction heater for couplings and bearings BALTECH HI-1612 is a unique development that has no analogues in the world. It has two built-in magnetic inductors (yokes) in a single housing, which makes it possible to heat two parts simultaneously. This model was developed by BALTECH for serial production and conveyors, where the induction heating of two gears or bearings is required during the assembling. This induction heater is intended to heat parts weighting up to 12 kg with a maximum outer diameter 210 mm.

The induction heater has two integrated magnetic inducers (yokes) in a single housing, which distinguishes it from other induction heaters. It has a power supply 220V, replaceable fuse and low energy consumption, which makes this induction heater accessible for wide use. The control panel of the induction heater displays a current (set) heating temperature, which is controlled by the temperature sensor - upon reaching the defined temperature the heater generates a signal and stops heating.

Also the induction heater can control the heating time and stops heating after a specified period of time. In comparison with self-made induction heaters all our heaters have a function of automatic demagnetization upon completion of heating. The induction heater BALTECH HI-1612 can heat parts up to 250C. The heating can be conducted both in a horizontal and vertical position. The BALTECH HI-1612 induction heater is a modification of the heater BALTECH HI-1610 with two yokes. It allows to install 2 parts simultaneously and thus to save time required for repair of gears, electric motors, etc. The technical characteristics of the induction heater BALTECH HI-1612 are the same as those of BALTECH HI-1610.

The measurement data can be transferred to the BALTECH Expert software for database creation, data analysis, prediction, diagnostics and report making.

Technical characteristics

Model BALTECH HI-1612 (2 yokes))
Nominal power, kVA 4,5
Voltage, V/Current,? 220/6
Frequency, Hz 50
Rotatable yoke Yes
Heated part
Maximum bearing weight, kg 30
Minimum inner diameter d, mm 14
Maximum outer diameter D, mm 180
W, mm 70
H, mm 100
Yoke dimensions
Yoke width, mm 10;14;20;30;40
Yoke length, mm 150
Control panel
Temperature setting, o?
Maximum temperature,o?
Automatic power reduction


Dimensions, mm 470 x 390 x 260
Heater weight (without yoke), kg 45

Marketing Products

|  Dynamic Balancing Machines |  Vibration & Balancing Analyzer | Triaxial Wireless Accelerometer |  Vibration Monitoring |
|  Laser Shaft Alignment |  Thermal Imaging Device |  Dial Gauge Shaft alignment |  vibration analyzer and balancer |
|  Vibration Meter |  Oil & Lubrication Analysis |  Infrared Thermometer |  Bearing Induction Heaters |

Balancing Services

| Inhouse Balancing | Condition Monitoring & Vibration Analysis | Onsite Balancing Services | Laser Alignment |
Rotor Repair & Services Products | Training & Seminar  |


Our Locations

5, U.K. Industrial Estate, Behind Durian Furniture,
Opp. Oswal Park, 2nd Pokharan Rd,
Thane ( W ) - 400 601, (M.S)
4 / A Wing, Bharat Indl Estate, Off. Lake Road, Opp. Hind Rectifier Co.
Bhandup (W)
Mumbai – 400 078 (M.S)
R / 375, TTC Industrial Area, Rabale,
Navi Mumbai - 400701 (M.S)
Gat No # 256, Indrayani East, Jyotibanagar, Talawade, Pune 412 112 (M.S)