- Ranipet
- Sivakasi
- Karur
- Udhagamandalam
- Hosur
The induction heater ROKADE IH-1001 is intended to heat bearings and parts weighing up to 105 kg. The induction heater has a heating temperature range 0-250°C. The rotatable yoke is easily input to the bearing hole. This has an electronic timer from 0 to 99minutes for setting the heating time. The heater has the function of automatic protection from overheating and function of automatic demagnetization. It weighs 42 kg and is intended to heat parts with a maximum outer diameter of 400 mm.
Bearings
Gearwheels
Sprockets
Compression rings
Labyrinth rings
Sleeves
Joints
| Product Data | RIH - 1000 |
| Diameter mm (Bearing) | 20 - 300 |
| Bearing Weight | 40 Kg |
| Power | 2.0 / 2.6 KVA |
| Voltage | 230V |
| Power Control | 25%, 50%, 75% & 100% |
| Temperature Control | 0 - 250°C |
| Maximum Temperature | 400C |
| Accuracy Temperature | ±3° C |
| Time - Control | 0 - 99 Minutes |
| Residual Magnetism | < 2A / cm |
| Overall Dimensions (wxdxh) (mm) | 300 x 260 x 250 |
| Space between supports (wxh) (mm) | 100 x 130 |
| Weight (Main Unit) | 19 Kg |
| Weight with Standard Yokes | 22 Kg |
| Horizontal Yoke Sizes (mm) | 14 x 14 x 220 |
| 20 x 20 x 220 | |
| 45 x 45 x 220 | |
| Can Heat Sealed & Pre-greased Bearings | ✓ |
| Thermal Over Protection | ✓ |
| Optional Accessories | |
| Horizontal Yoke Sizes (mm) | 10 x 10 x 220 |
| 18 x 18 x 220 | |
| 30 x 30 x 220 | |
| 40 x 40 x 220 | |
| Digital Thermometer (0-500C) | ✓ |
| Roll - Sliding Model | ------- |
| Swing Arm Model | ------- |
| Riser Block (Pair) (mm) | ------- |
| Magnetic Temperature Probe | ✓ |
TAMIL NADU
ANDHRA PRADESH
KARNATAKA
KERALA
TELANGANA
MAHARASHTRA
GOA
GUJARAT
UTTAR PRADESH
DELHI
RAJASTHAN
PUNJAB
HIMACHAL PRADESH
HARYANA
UTTARAKHAND
WEST BENGAL
ODISHA
JHARKHAND
BIHAR
MADHYA PRADESH
CHHATTISGARH
Thane
Corporate Office
Delhi
Factory & Office
Chennai
Branch Office
Copyright ©2024 Rokade RotoTechniks All Rights Reserved.
