RRT logo

ROKADE Bearing Induction Heater - RIH 1002

Used For

General engineering

Manufacturer of pumps

Gear box manufacture

Manufacture of electric motors

Maintenance and repair workshops

Vehicle industry, cars and trucks


User friendly

Automatic demagnetisation

Increased operational safety

Precise, even, quick heating

Selectable power reduction for heating up smaller parts

There is no risk of damage (from excessive mechanical stress, open flames, dirty oil baths, excessively hot ovens and plates)



Where parts are to be heated before installation ROKADE IH-1002 can be used. Heating of bearing replacement, coupling installation and heating of gearwheels before gearbox assembling can be done. Fast, easy and cost-effective heating of any part before installation can be conducted. Bearing heating, coupling heating and installation, gearbox assembling is performed several times faster in comparison with traditional methods (hot plates, oil bath, burners, etc). Heating of parts weighing up to 125 kg with an inner diameter up to 20 mm can be conducted by using ROKADE HI-1002.This also has an electronic timer from 0 to 99 minutes. 6 kVA is the maximum power.


Industry 4.0


Industry 4.0


Industry 4.0


Industry 4.0

Compression rings

Industry 4.0

Labyrinth rings

Industry 4.0


Industry 4.0



Technical Specifications

Product Data RIH - 1000
Diameter mm (Bearing) 20 - 300
Bearing Weight 40 Kg
Power 2.0 / 2.6 KVA
Voltage 230V
Power Control 25%, 50%, 75% & 100%
Temperature Control 0 - 250°C
Maximum Temperature 400C
Accuracy Temperature ±3° C
Time - Control 0 - 99 Minutes
Residual Magnetism < 2A / cm
Overall Dimensions (wxdxh) (mm) 300 x 260 x 250
Space between supports (wxh) (mm) 100 x 130
Weight (Main Unit) 19 Kg
Weight with Standard Yokes 22 Kg
Horizontal Yoke Sizes (mm) 14 x 14 x 220
20 x 20 x 220
45 x 45 x 220
Can Heat Sealed & Pre-greased Bearings
Thermal Over Protection
Optional Accessories
Horizontal Yoke Sizes (mm) 10 x 10 x 220
18 x 18 x 220
30 x 30 x 220
40 x 40 x 220
Digital Thermometer (0-500C)
Roll - Sliding Model -------
Swing Arm Model -------
Riser Block (Pair) (mm) -------
Magnetic Temperature Probe